Making sure that your tires are properly inflated is one of the most important things you can do to maintain your vehicle. Underinflated tires can lead to all sorts of problems, including decreased fuel efficiency and increased wear and tear.
One of the best ways to ensure that your tires are properly inflated is to use a tire inflator. Tire inflators are relatively inexpensive and easy to use, and they can save you a lot of money in the long run by helping to extend the life of your tires.
If you’re not sure how to attach a tire inflator to an air compressor, don’t worry – it’s actually quite easy. In this article, we’ll walk you through the process step-by-step so that you can get started inflating your tires as soon as possible.
How to Use an Air Compressor on Your Flat Tire
The following information will show you how to properly use an air compressor on your flat tire:
Use the Right Tools-
First, you’ll need to gather the right tools.
Air hose:
Most air compressors come with an air hose that can be used to attach the inflator to the tire. If your compressor didn’t come with an air hose, you can purchase one at any hardware store.
Tire pressure gauge:
You’ll need a tire pressure gauge to check the pressure of your tires after you’ve inflated them. Normally you fill up your tires to about 30-35 PSI.
Tire chuck:
The tire chuck is the part of the inflator that actually attaches to the tire. Make sure that the tire chuck is compatible with the air hose before you begin.
Regulator:
The regulator is a valve that controls the amount of air that flows into the tire. Most compressors have a built-in regulator, but if yours doesn’t, you can purchase one at any hardware store.
Know the Tire Pressure
Now that you have all the tools you need, it’s time to start inflating your tire. Begin by checking the pressure in your tires with a tire pressure gauge. The recommended tire pressure for most vehicles is 30-35 PSI, but it’s always a good idea to check the owner’s manual for your specific vehicle to see what the recommended pressure is.
Also Read: What Does Tire Pressure Sensor Fault Mean
If you find that one of your tires is significantly low on air, don’t try to inflate it all the way to the recommended pressure in one go. Instead, add a few PSI at a time and check the pressure regularly until you reach the desired level.
Get the Tire Ready
Next, you’ll need to get the tire ready to be inflated. If the tire is completely flat, you may need to remove it from the vehicle so that you can access the valve stem. Once the tire is off, use the tire chuck to remove the cap from the valve stem.
Some tires have a small pin in the center of the valve stem that needs to be depressed before air can flow into the tire. If your tire has this type of valve stem, depress the pin with the tire chuck before moving on to the next step.
Turn on the Air Compressor
It’s finally time to start inflating your tire! Turn on the air compressor and set the regulator to the desired PSI. Then, take the air hose and attach it to the tire chuck. Make sure that the connection is secure before moving on.
Also Read: Tire Losing Pressure But No Leak
Correctly Fill the Tire
Once the air hose is attached to the tire chuck, you can begin inflating the tire. It’s always a good idea to check the pressure regularly while you’re inflating so that you don’t overdo it. Remember, you want to stop inflating when you reach the recommended PSI for your specific vehicle.
Detach the Hose
Lastly, once the tire is inflated, detach the hose from the tire chuck and replace the cap on the valve stem. If you removed the tire from the vehicle, go ahead and put it back on now. And that’s all there is to it!
FAQs
What PSI should I set my air compressor to fill tires?
The recommended PSI for most vehicles is 30-35, but it’s always a good idea to check the owner’s manual for your specific vehicle to see what the recommended pressure is.
Why Proper Tire Inflation Saves You Money
Tire pressure affects more than just your gas mileage. It also has an impact on how long your tires will last, how well your car handles, and how safe you are on the road.
Conclusion
So, there you have it! Now you know how to properly attach a tire inflator to an air compressor. Just remember to use the right tools, know the recommended PSI for your vehicle, and check the pressure regularly while you’re inflating the tire. And if you ever have any questions, feel free to refer back to this article. Thanks for reading!
If you liked this article about how to attach tire inflator to air compressor, consider checking out these other articles below —
